Jump to content

Template:Geotechnical engineering

From MediaWiki3D

Revision as of 16:12, 25 August 2025 by OpenDEM 1 (talk | contribs) (1 revision imported from wikipedia:en:Template:Geotechnical_engineering)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Geotechnical engineering

Offshore geotechnical engineering

Investigation
and
instrumentation

Field (in situ)

Laboratory
testing

Soil classification

Atterberg limits

California bearing ratio

Direct shear test

Proctor compaction test

Triaxial shear test

Hydraulic conductivity tests

Water content tests

Types	Clay Silt Sand Gravel Peat Loam Loess
Properties	Hydraulic conductivity Water content Void ratio Bulk density Thixotropy Reynolds' dilatancy Angle of repose Friction angle Cohesion Porosity Permeability Specific storage Shear strength Sensitivity

Structures
(Interaction)

Natural features	Topography Vegetation Terrain Topsoil Water table Bedrock Subgrade Subsoil
Earthworks	Shoring structures Retaining walls Gabion Ground freezing Mechanically stabilized earth Pressure grouting Slurry wall Soil nailing Tieback Land development Landfill Excavation Trench Embankment Cut Causeway Terracing Cut-and-cover Cut and fill Fill dirt Grading Land reclamation Track bed Erosion control Earth structure Expanded clay aggregate Crushed stone Geosynthetics Geotextile Geomembrane Geosynthetic clay liner Cellular confinement Infiltration
Foundations	Shallow Deep

Forces	Effective stress Pore water pressure Lateral earth pressure Overburden pressure Preconsolidation pressure
Phenomena/ problems	Permafrost Frost heaving Consolidation Compaction Earthquake Response spectrum Seismic hazard Shear wave Landslide analysis Stability analysis Mitigation Classification Sliding criterion Slab stabilisation Bearing capacity * Stress distribution in soil

Numerical analysis
software

Template:Navbox doc

Retrieved from "https://mediawiki3d.org/index.php?title=Template:Geotechnical_engineering&oldid=3583"